Machinability analysis of delamination and thrust force in drilling of pure and added GFRP composites

dc.contributor.authorÜnüvar, Ali
dc.contributor.authorÖztürk, Osman
dc.date.accessioned2023-01-23T11:32:29Z
dc.date.available2023-01-23T11:32:29Z
dc.date.issued2022en_US
dc.departmentFakülteler, Mimarlık ve Tasarım Fakültesi, Endüstriyel Tasarım Bölümüen_US
dc.description.abstractThe effects of cutting parameters on the thrust force and delamination factor in the drilling of pure, Al2O3, and SiO2 added GFRP/epoxy composites were investigated. Experimental studies were performed to investigate thrust force and delamination factor. Taguchi experimental design and response surface methodology were employed to establish parametric relationships between the experimental parameters and the machinability outputs consisting of delamination and thrust force. When examining the effect of cutting speed and feed on thrust forces and delamination factors for the three materials, the smallest values of the cutting parameters for all three materials gave the minimum thrust forces and delamination factors. Machinability Index is also proposed. According to the machinability index, under the effect of delamination and thrust force parameters, it was seen that pure epoxy composite material has better machinability than the other composite materials. It has been found that the effect of feed rate on delamination is greater than the cutting speed, and the cutting speed has a low effect.en_US
dc.identifier.doi10.1177/00219983221137648en_US
dc.identifier.scopus2-s2.0-85141360770en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.urihttps://hdl.handle.net/11467/6144
dc.identifier.urihttps://doi.org/10.1177/00219983221137648
dc.identifier.wosWOS:000878363700001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSAGE Publicationsen_US
dc.relation.ispartofJournal of Composite Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectdelamination; GFRP; machining; thrust forceen_US
dc.titleMachinability analysis of delamination and thrust force in drilling of pure and added GFRP compositesen_US
dc.typeArticleen_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.56 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: