Robust Multiobjective Optimization Of Cutting Parameters In Face Milling

Basit Öğe Kaydı
dc.authoridTR35087en_US
dc.authoridTR172727en_US
dc.authoridTR156362en_US
dc.authoridTR2370en_US
dc.contributor.authorAykut, Seref
dc.contributor.authorKentli, Aykut
dc.contributor.authorGulmez, Servet
dc.contributor.authorYazicioglu, Osman
dc.date.accessioned2015-09-10T13:14:44Z
dc.date.available2015-09-10T13:14:44Z
dc.date.issued2012en_US
dc.departmentİstanbul Ticaret Üniversitesien_US
dc.description.abstractIn this paper, a new multiobjective optimization approach is proposed for the selection of the optimal values for cutting conditions in the face milling of cobalt-based alloys. This approach aims to handle the possible manufacturing errors in the design stage. These errors are taken into consideration as a change in design parameter, and the design most robust to change is selected as the optimum design. Experiments on a cobalt-based superalloy were performed to investigate the effect of cutting speed, feed rate and cutting depth on the cutting forces under dry conditions. Material removal rate values were also obtained. Minimizing cutting forces and maximizing the material removal were considered as objectives. It is believed that the used method provides a robust way of looking at the optimum parameter selection problems.en_US
dc.identifier.issn1785-8860
dc.identifier.scopus2-s2.0-84866155036en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://hdl.handle.net/11467/1162
dc.identifier.wosWOS:000309696900006en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherBudapest Techen_US
dc.relation.ispartofActa Polytechnica Hungaricaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectFace Milling; Robust Optimization; Cobalt-Based Superalloy; Sensitivity; Multiobjective Optimization; Optimum Cutting Parameters.en_US
dc.titleRobust Multiobjective Optimization Of Cutting Parameters In Face Millingen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Robust Multiobjective Optimization of Cutting Parameters in Face Milling.pdf
Boyut:
245.45 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.71 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mimarlık ve Tasarım Fakültesi , Endüstriyel Tasarım Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu