Robust Multiobjective Optimization Of Cutting Parameters In Face Milling
Yükleniyor...
Tarih
2012
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Budapest Tech
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
In this paper, a new multiobjective optimization approach is proposed for the selection of the optimal values for cutting conditions in the face milling of cobalt-based alloys. This approach aims to handle the possible manufacturing errors in the design stage. These errors are taken into consideration as a change in design parameter, and the design most robust to change is selected as the optimum design. Experiments on a cobalt-based superalloy were performed to investigate the effect of cutting speed, feed rate and cutting depth on the cutting forces under dry conditions. Material removal rate values were also obtained. Minimizing cutting forces and maximizing the material removal were considered as objectives. It is believed that the used method provides a robust way of looking at the optimum parameter selection problems.
Açıklama
Anahtar Kelimeler
Face Milling; Robust Optimization; Cobalt-Based Superalloy; Sensitivity; Multiobjective Optimization; Optimum Cutting Parameters.
Kaynak
Acta Polytechnica Hungarica
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
