Wear behavior of irregular shape Ti6Al4V powder reinforced with carbon nanotubes

Basit Öğe Kaydı
dc.contributor.authorCeylan, Muhammet
dc.contributor.authorTopcu, Ismail
dc.date.accessioned2021-01-25T21:48:02Z
dc.date.available2021-01-25T21:48:02Z
dc.date.issued2020
dc.departmentİstanbul Ticaret Üniversitesien_US
dc.description.abstractThe purpose of this study was to investigate the sintering behavior, microstructural evolution, and the effect on wear resistance of carbon nanotubes (CNT) with the addition of a mechanical alloy (Ti6Al4V) and sintered irregular Ti64 powder. The mechanical alloy powders utilized in this study were produced through the process of CIP (Cold Isostatic Press) in order to produce samples by compress on under various pressures within a 300 MPa floating molded press. The samples were sintered at a high vacuum (10-5 mbar) for 60 minutes at a temperature of 1275 degrees C. After sintering, the materials were characterized using an optic microscope (OM), scanning electron microscopy (SEM) and EDX (Energy-dispersive X-ray spectroscopy) to determine whether the materials had wear resistance, density measurement, etc. The Carbon Nanotube wear and friction behavior were investigated under various conditions using a pin wear tester on a disc followed by a scanning electron microscopy (SEM) analysis. The objective of this study was to evaluate the density, metallographic properties and hardness of Ti64 samples supplemented with different CNT ratios as a function of sintering temperature. Theoretical density and micro-hardness of mechanical alloyed and sintered irregular Ti64 powders changed with the additions to CNT under increased sintering temperatures.en_US
dc.identifier.doi10.36410/jcpr.2020.21.5.539en_US
dc.identifier.endpage546en_US
dc.identifier.issn1229-9162
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85095423609en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage539en_US
dc.identifier.urihttps://doi.org/10.36410/jcpr.2020.21.5.539
dc.identifier.urihttps://hdl.handle.net/11467/4494
dc.identifier.volume21en_US
dc.identifier.wosWOS:000595593200004en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherKOREAN ASSOC CRYSTAL GROWTH, INCen_US
dc.relation.ispartofJOURNAL OF CERAMIC PROCESSING RESEARCHen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectSinteringen_US
dc.subjectTi6Al4Ven_US
dc.subjectCarbon Nanotubesen_US
dc.subjectWearen_US
dc.subjectTi6Al4V Powderen_US
dc.titleWear behavior of irregular shape Ti6Al4V powder reinforced with carbon nanotubesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu