Experimental investigation on mechanical properties of Multi Wall Carbon Nanotubes (MWCNT) reinforced aluminium metal matrix composites

Basit Öğe Kaydı
dc.contributor.authorTopcu, Ismail
dc.contributor.authorCeylan, Muhammet
dc.contributor.authorYilmaz, Elif Burcu
dc.date.accessioned2021-01-25T21:47:58Z
dc.date.available2021-01-25T21:47:58Z
dc.date.issued2020
dc.departmentİstanbul Ticaret Üniversitesien_US
dc.description.abstractThe aim of this research is to obtain better micrographs and to perform the mechanical characterization of Multi Wall Carbon Nanotubes (MWCNT) consolidated aluminum matrix composite (AMC). This research is focused on the mechanical behavior and microstructure characteristics in MWCNT consolidated aluminum matrix composites. The composites of MWCNT/Al were successfully fabricated using powder metallurgy (PM) mechanical alloying (MA) sintering. X-ray diffraction (XRD) and Scanning electron microscopy (SEM) micrographs were utilized in order to determine the porosity, density and hardness characteristics to observe if they are affected or not concerning the performance of composites in different reinforced % MWCNT rate conditions. Along with SEM and XRD studies, this study details the homogeneous distribution of nanotubes which showed no evidence of decomposition; this was supported by a successive increase in hardness and abrasion resistance. This increase in abrasion resistance and hardness can be accredited to the further activation of the slip system due to the presence of MWCNTs. Based on the conclusions of this study, the authors determined that the mechanical alloying sintering method provides promising results for the mechanical alloying fabrication of MWCNT/Al composites, especially due to the different % rate reinforced up capabilities.en_US
dc.identifier.doi10.36410/jcpr.2020.21.5.596en_US
dc.identifier.endpage601en_US
dc.identifier.issn1229-9162
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85095444774en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage596en_US
dc.identifier.urihttps://doi.org/10.36410/jcpr.2020.21.5.596
dc.identifier.urihttps://hdl.handle.net/11467/4467
dc.identifier.volume21en_US
dc.identifier.wosWOS:000595593200012en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherKOREAN ASSOC CRYSTAL GROWTH, INCen_US
dc.relation.ispartofJOURNAL OF CERAMIC PROCESSING RESEARCHen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPowder metallurgyen_US
dc.subjectMulti Wall Carbon Nanotubesen_US
dc.subjectMechanical behaviouren_US
dc.titleExperimental investigation on mechanical properties of Multi Wall Carbon Nanotubes (MWCNT) reinforced aluminium metal matrix compositesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu