Experimental Investigations on the Drilling Performance of Carbon Nanotubes Reinforced Glass/Epoxy Multi-scale Composites

Basit Öğe Kaydı
dc.contributor.authorKoyunbakan, Murat
dc.contributor.authorEskizeybek, Volkan
dc.contributor.authorÜnüvar, Ali
dc.contributor.authorAvcı, Ahmet
dc.date.accessioned2024-10-12T19:47:13Z
dc.date.available2024-10-12T19:47:13Z
dc.date.issued2024
dc.departmentİstanbul Ticaret Üniversitesien_US
dc.description.abstractModifying fiber-reinforced polymers (FRPs) with carbon nanotubes (CNTs) becomes an effective strategy to improve the mechanical performance of the structural parts and add multifunctionality. However, this strategy increases the costs of such new-generation multi-scale composites. Machining of FRPs is challenging due to their susceptibility to machining-driven damages, leading to high-cost wastes. To prevent high-cost waste, the machinability of new-generation multi-scale composites with minimum damage becomes a vital processing issue. This work investigates the impact of CNTs on the drilling performance and hole quality of glass/epoxy multi-scale composites. Multi-scale composite laminates were drilled with high-speed steel drills under dry conditions. Cutting speed and feed rate were parametrically optimized, considering the deformation factor, delamination, and thrust force. The change in thrust force was recorded in situ, and deformation factors were calculated using image processing techniques. Moreover, the damage assessment of drilled holes was carried out with scanning electron microscope analysis to reveal the drilling-induced micro-scale damages. The addition of CNTs within the epoxy matrix increased thrust forces; however, lower delamination failures around exit sides were observed for multi-scale composites. Taguchi technique and analysis of variance were utilized to explore the contributions of drilling parameters and material type to the thrust force and deformation factor. Feed rate and material type were major factors affecting the deformation factor. © 2024, TUBITAK. All rights reserved.en_US
dc.description.sponsorshipDepartment of Mechanical Engineering; Selcuk Universityen_US
dc.identifier.doi10.31202/ecjse.1366208
dc.identifier.endpage168en_US
dc.identifier.issn2148-3736
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85199928088en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage160en_US
dc.identifier.urihttps://doi.org/10.31202/ecjse.1366208
dc.identifier.urihttps://hdl.handle.net/11467/8830
dc.identifier.volume11en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTUBITAKen_US
dc.relation.ispartofEl-Cezeri Journal of Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.snmzScopus_20241012en_US
dc.subjectCarbon Nanotubeen_US
dc.subjectDelaminationen_US
dc.subjectMachinabilityen_US
dc.subjectMulti-scale Compositeen_US
dc.titleExperimental Investigations on the Drilling Performance of Carbon Nanotubes Reinforced Glass/Epoxy Multi-scale Compositesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu