Yazar "Karabacak, Mustafa" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • Küçük Resim
    Öğe
    Application of exergetic analysis to inverted Brayton cycle engine at different flight conditions
    (Elsevier, 2023) Karabacak, Mustafa; Kirmizi, Mehmet; Aygun, Hakan; Turan, Onder
    The aviation sector has continued to be modernized by overcoming technological challenges involving strict constraints for mission requirements. In this context, the great attention to newly proposed methods which the requirements satisfied has been drawn in the related aviation field. As a novelty, performance and exergy an alyses of inverted Brayton cycle engine (IBCE) are investigated at supersonic speed (2.5 M) by comparing it with a conventional afterburning turbojet engine (CATE) in this study. Moreover, exergy analysis is performed solely for the IBCE at 5 M where only the IBCE could generate thrust. According to performance findings, specific fuel consumption (SFC) of the CATE changes from 57.97 g/kNs and 71.72 g/kNs whereas it raises from 51.76 g/kNs and 56.57 g/kNs for the IBCE due to variation of turbine inlet temperature (TIT) and afterburner exit temper ature (AET) at 2.5 M. Also, thermal efficiency of the CATE varies approximately between 32.97% and 46.73% while that of IBCE changes between 50.72% and 58.43% for IBCE at 2.5 M. At hypersonic speed, SFC of the IBCE is measured to vary between 71.34 g/kN and 85.49 g/kN at 5 of Mach. Lastly, the exergy efficiency of IBCE changes between 23.73% and 27.70% at same conditions. Where the higher TIT leads to lowering it whereas the higher AET provides increment of exergy efficiency. This study shows that thanks to cycle change, gas turbine engines could provide more advantages for new generation aircraft compared with conventional ones.
  • Küçük Resim
    Öğe
    Off-design analysis of the inverted Brayton cycle engine
    (Emerald Publishing, 2024) Karabacak, Mustafa; Turan, Önder
    Purpose: The purpose of this study is to perform an off-design analysis of the inverted Brayton cycle engine. Design/methodology/approach: The off-design analysis equations of the inverted Brayton cycle engine were first derived in this study and the control parameters of the inverted Brayton cycle engine were first determined and investigated. Findings: It is observed that by controlling the total temperature decrease in cooling section, it is possible to adapt the engine for low specific fuel consumption working conditions or high thrust working conditions. Specific fuel consumption is reduced by 27.1 % by stopping cooling in the cooling section and thrust is increased by 27.6 % by working with full load of the cooling section (500 K temperature decrease in cooling section). It is observed that thrust depending on the flight Mach number increases with an increase in flight Mach number and reaches a peak value at 5.21 flight Mach number and reduces by 80.8 % at 6 flight Mach number relative to the peak value. The specific fuel consumption increases rapidly as the Mach number increases, and the specific fuel consumption is 49.0 g/[kN.s] at Mach 1, reaches 70.4 g/[kN.s] at Mach 5 and increases to 412 g/[kN.s] at Mach 6. The specific fuel consumption increases from 68.1 to 73.0 g/(kN.s) and the thrust decreases from 16.5 to 13.3 kN as the total preburner exit temperature increases from 1,500 to 2,000 K. Specific fuel consumption decreases from 83.1 to 64.8 g/(kN.s) and thrust increases from 4.60 to 11.08 kN depending on afterburner exit total temperature increase from 1,800 to 2,500 K. Research limitations/implications: The cooling section reduces total temperature of the gas flow to lower values to increase the compressor total pressure ratio. The compressor increases the total pressure of the gas flow to the optimum total pressure ratios to increase the nozzle exit Mach number and gain more thrust. The afterburner increases the total temperature of the gas flow to increase the sound speed in the nozzle exit to increase thrust. The nozzle expands the gas flow to reduce the static pressure of the gas flow to near the optimum value, atmosphere pressure, to increase thrust and reduce specific fuel consumption. Practical implications: Hypersonic and supersonic air vehicles can use the current engine model for the its own propulsion systems. Social implications: After first heavier than air flight, aero engines was designed for only used for aero vehicle. Internal combustion engines were used for propelled propeller aircraft at the first term of aircraft. However, propeller-propelled aircrafts are not sufficient to increase aircraft velocity to supersonic Mach numbers due to the shock losses of propeller, so the supersonic era was only introduced by revolution in propulsion systems with new concept. A jet engine was developed to be candidate for supersonic flight. Originality/value: Off-design analysis equations of an inverted Brayton cycle engine were first derived in this study. Furthermore, the control parameters of the inverted Brayton cycle engine were first determined and investigated in this paper.